Up to 50% OFF – Limited Time Only! Shop Now

Mackie HR824mk2 Studio Monitor

Mackie HR824mk2 Studio Monitor

FEATURESHigh-resolution Active studio reference monitorUltra-linear frequency response for accurate mix translation8.75" high-precision, low-distortion LF transducer1" titanium dome, ferrofluid cooled tweeterOptimized Waveguide for wide, even sweet zoneTwi

$98.90 $924.99

Payment: Payment Option Image
  • Security Policy (Safe & Secure Shopping Guaranteed)
  • Delivery Policy (Fast & Reliable Shipping)
  • Return Policy (5-Day Money-Back Guarantee)

FEATURES

  • High-resolution Active studio reference monitor
  • Ultra-linear frequency response for accurate mix translation
  • 8.75″ high-precision, low-distortion LF transducer
  • 1″ titanium dome, ferrofluid cooled tweeter
  • Optimized Waveguide for wide, even sweet zone
  • Twin FR Series amps – 150W for LF / 100W for HF
  • Cast aluminum Zero Edge Baffle minimizes diffraction
  • Full internal damping eliminates midrange artifacts
  • Passive radiator provides tight, articulate bass extension down to 35Hz
  • Acoustic Space, LF roll-off, and HF controls
  • Balanced XLR, TRS, and unbalanced RCA inputs
  • OmniMount ready for easy wall/ceiling placement
  • THX pm3 certified for surround sound applications
  • Perfect for High-Definition audio, cinema and gaming systems
  • Free-field Frequency Response: &plsumn;1.5dB, 37Hz to 20kHz
  • Lower cutoff frequency: -3dB @ 35Hz
  • Upper cutoff frequency: -3dB @ 22kHz
  • Sound Pressure Level at 1 meter, -7.5dBu into balanced input: 100dB SPL @ 1m
  • Maximum peak SPL per pair: 120dB SPL @ 1m
  • Maximum short term SPL on axis, half space 80Hz to 2.5kHz: 111dB SPL @ 1m
  • Residual noise (maximum gain, 600? source, 20Hz-20kHz bandwidth): < 8dB SPL @ 1m

Rated Line Input Voltage and Power:

  • (Power consumption):
  • Standby mode: 8 watts
  • Quiescent (idle): 18 watts
  • Musical Program, Loud mix: 135 watts
  • US: 120 VAC, 60Hz
  • Rated Power (For UL-6500, CSA-E65-94, EN-60065): 150 watts

Amplifier Section

  • (Low-frequency power amplifier)
  • Rated Power (at 1kHz with 1% THD): 150W
  • Rated Load Impedance: 4 ohms
  • Burst Power Output: 350W
  • Rated THD (1W to -1dB of rated power): 0.1 %
  • Slew Rate: 35V/S
  • Distortion (THD, SMPTE IMD, DIM 100): <0.035%

Signal-to-Noise

  • (20Hz-20kHz, unweighted, referenced to 150W into 4?):
    > 102dB
  • Cooling: Convection
  • Design: Class AB, Parametric Servo Feedback
  • (High-frequency power amplifier)
  • Rated Power(at 1kHz with 1% THD): 100W
  • Rated Load Impedance: 6 ohms
  • Rated THD (1W to -1dB of rated power): 0.1 %
  • Burst Power Output: 210W
  • Slew Rate: 35V/S
  • Distortion (THD, SMPTE IMD, DIM 100): < 0.035%
    Signal-to-Noise (20Hz-20kHz, unweighted, referenced to 40W into 8?): > 102dB
  • Cooling: Convection
  • Design: Monolithic IC, Conventional Class AB

System Specifications

  • Input Type: Balanced Differential (XLR and 1/4″ TRS), Unbalanced (RCA)
  • Input Impedance: 20k? Balanced, 10k? Unbalanced
  • Input Protection: Rfi and Level Protected
  • Maximum Input Level: +20dBu
  • Low Frequency filter: -3dB @ 37Hz, 2nd-order transitional high-pass filter, -3dB @ 47Hz, 4th-order Chebyshev high-pass filter, -3dB @ 80Hz, 4th-order Butterworth high-pass filter
  • HF Equalization: 2dB @ 10kHz, shelving
  • Acoustic Space: (A position) -4dB @ 50Hz, shelving, (B position) -2dB @ 50Hz, shelving, (C position) flat
  • (Compressor)
  • Independent high and low-frequency overload detection
  • Enclosure Alignment: 6th Order
  • Over Excursion Prevention: 2nd Order High-Pass filter
  • Low Line Voltage Shut Down: 60% of Nominal Line
  • Thermal Protection: Amplifier Shut-Down, Auto Reset
  • Muting: 5 seconds at turn-on
  • Driver Protection: Independent LF and HF Detection, Overall Compression

Transducers

  • Low-frequency driver:
  • Diameter: 8.75 inches (170mm)
  • Sensitivity (2.83V, 1m): 91dB SPL
  • Nominal Impedance: 4?
  • Voice Coil Diameter: 1.6″ (40mm)
  • Frame: Die-cast magnesium
  • Magnet: Ferrite
  • Fully shielded: Ferrite opposing magnet
  • High-frequency driver: Sensitivity (2.83V, 1m): 91dB SPL
  • Nominal Impedance: 6?
  • Power Handling (Long Term/Program): 20/50 watts
  • Frequency Range: 1.6kHz to 22kHz
  • Diaphragm/Suspension: Titanium with polymer suspension
  • Voice Coil Diameter: 1.0″ (25.4mm)
  • Magnet: Neodymium
  • Bucking Magnet: Ferrite opposing magnet
  • Passive Radiator: 6″ x 9″ (152mm x 228mm) mass-loaded elliptical flat
  • piston with variable thickness filleted-edge rubber surround
  • Crossover Type: Modified Linkwitz-Riley, 24dB/octave @ 1900Hz

      Reviews

      There are no reviews yet.

      Be the first to review “Mackie HR824mk2 Studio Monitor”

      Your email address will not be published. Required fields are marked *

      At Our Store, we aim to deliver your orders as quickly and efficiently as possible. Below you will find everything you need to know about our shipping and delivery process.

      Shipping Methods & Rates
      We offer a variety of shipping options to meet your needs. The cost of shipping depends on the shipping method you choose, the destination, and the size of your order. Please refer to the shipping options available at checkout for more details.

      Express Shipping: Delivery within 3-5 business days (next-day delivery for some locations).
      International Shipping: Available to selected countries. Delivery time and shipping fees will vary based on destination.
      Processing Time
      Orders are typically processed within 1-2 business days from the time your order is placed. Please note that during peak seasons or promotional periods, processing time may be slightly longer.

      Tracking Your Order
      Once your order has been dispatched, you will receive an email with tracking information so you can monitor the status of your shipment. You can also check the status of your order in your account under “Order History.”

      Delivery Times
      Estimated delivery times vary depending on your location and the shipping method selected. For international orders, customs processing may cause delays, which are beyond our control.

      Domestic Orders: Typically arrive within 3 business days.
      International Orders: Delivery times may range from 7 business days, depending on the destination country and customs clearance times.

      Lost or Damaged Packages
      While we take great care to ensure your items are packaged securely, accidents can happen. If your order arrives damaged or you believe it’s lost, please contact us at customer service email or phone number within 7 days of receiving your package. We will investigate the issue and provide a solution.

      Contact Us
      If you have any questions or concerns about shipping and delivery, don’t hesitate to contact our customer support team at customer service email or phone number. We’re here to help!

      Thank you for shopping! We appreciate your business and strive to provide you with an exceptional shopping experience.

      Related products