Neumann KH 80 DSP 4″ Powered Studio Monitor(Each) – Gray

(1)In-house simulated tweeter with alloy fabric domeLatest modeling techniques used to minimize non-linear (harmonic and intermodulation) distortionLow-distortion high frequency reproduction(2)Elliptical Mathematically Modelled Dispersion (MMD) waveguideSm

$96.90 ~~$664.00~~

Payment:

Security Policy (Safe & Secure Shopping Guaranteed)
Delivery Policy (Fast & Reliable Shipping)
Return Policy (5-Day Money-Back Guarantee)

(1)
In-house simulated tweeter with alloy fabric dome

Latest modeling techniques used to minimize non-linear (harmonic and intermodulation) distortion
Low-distortion high frequency reproduction

(2)
Elliptical Mathematically Modelled Dispersion (MMD) waveguide

Smoother off-axis response
More forgiving of diverse acoustical environments

Wide horizontal dispersion

Freedom of movement across the mixing console

Narrow vertical dispersion

Reduces reflections off the mixing console

(3)
Two-color Neumann logo

Displays operation status and activation of the extensive protection system

(4)
In-house modelled long-throw composite sandwich cone bass driver with Extremely Linear Force Factor (ELFF) and flow optimized die cast basket

Damping of break up modes brings low distortion at high sound levels
Linear pistonic motor gives a very low harmonic distortion even at high excursions
Reduced air noise and improved rocking modes

(5)
Robust metal grilles

Protects against mechanical damage

(6)
Large high-capacity flow-optimized bass reflex ports with pipe resonance damping

Fast bass transient response
Reduced bass compression at high output levels
No coloration from organ pipe resonance
Easier to mount in tight spaces

(7)
Compact polycarbonate composite cabinet

Robust package for a long life
No standing wave resonances

One-piece front panel with no discontinuities

Reduced diffraction and smoother frequency response

(8)
Standby function

Reduces power consumption when product is not in use

Control function

Use the back panel controls or the control set defined by the Neumann.Control iPad@ app

(9)
4-position low-mid acoustical control

Compensates for nearby desktops
Fast acoustical set up in mobile applications
Repeatable acoustical settings after moving loudspeakers

(10)
Wide range input gain and output level controls

Easier interfacing with signal sources

(11)
Fully documented extensive mounting hardware range

More flexibility in mounting cabinets in more diverse locations and backwards compatible to previous products
Easy advanced planning for installations

(12)
Universal double-insulated switched-mode power supply (100 240 V)

One version works in any country and robust to poor quality mains supply
Ground loops are impossible

(13)
Network connector using standard IP protocol and your existing network infrastructure

Loudspeaker system can be controlled via the Neumann.Control iPad@ app

(14)
Analogue input socket can accept XLR or 6.3 mm (1/4) Jack plugs, electronically balanced with completely symmetrical internal signal chain

Completely symmetrical internal signal routing minimizes noises caused by external electromagnetic interference

MORE FEATURES

Production consistency due to automated computer optimized alignment in final testing

Any KH 80 DSP is pair matched to any other KH 80 DSP

Separate fast acting thermo limiters for woofer and tweeter to protect the voice coils and power amplifiers

Woofer soft clip and excursion limiters
Fast acting and highly reliable
Allows extraction of the maximum performance

Low heat dissipation amplifiers with large headroom and overheat limiting

Improved transient response
Assured reliability and safety

Linear phase crossover

Flat phase response for timing transparency

With Neumann.Control iPad app:

8 x Precision Alignment acoustical controls: Accurate and flexible alignment of the loudspeaker in the room and within systems
Lip-sync delay: To align audio and video signals up to 1.75 frames at 50 Hz or 2.1 frames at 60 Hz
Time-of-flight delay: To compensate for listening distance differences up to 24 m (79 ft.)
Dimming the Neumann logo for low lighting level conditions or behind the screen applications

Free field frequency response 6 dB	53 Hz 21 kHz
Free field frequency response 3 dB	57 Hz 21 kHz
Free field frequency linearity deviation between 100 Hz and 10 kHz	0.7 dB
Reproduction accuracy between 100 Hz and 10 kHz: 100%, 80%, 50% of loudspeakers produced	0.26; 0.23; 0.17 dB
Self-generated noise at 10 cm (with input gain set to 100 dB SPL for 0 dBu)	<20 dB(A) SPL
Sine wave output with a THD < 0.5 % at 1 m in half space	90 dB SPL (>200 Hz)
Max. SPL calc. in half space at 3% THD at 1m (averaged between 100 Hz and 6 kHz)	108.8 dB SPL
Max. SPL in full space at 3% THD at 1m (averaged between 100 Hz and 6 kHz)	102.8 dB SPL
Bass capability: Max. SPL in half space at 3% THD at 1m (averaged between 50 Hz and 100 Hz)	96.8 dB SPL
Max. short term SPL with IEC-weighted noise (IEC 60268-5) at 1 m, in typical listening conditions	104 dB(C) SPL
Max. short term SPL with music material at 2.3 m in typical listening conditions (pair / full range)	93 dB(C) SPL
Max. short term SPL with music material at 2.3 m, in typical listening conditions (pair with subwoofer)	100 dB(C) SPL
Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair full range)	88 / 93 dB(C) SPL
Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair with subwoofer)	91 / 96 dB(C) SPL
Analog input(s)	XLR / 6.3 mm () Jack: analog electronically balanced
Analog input impedance	14k Ohms
Max. input level	+24 dBu for 94 dB SPL setting; +18 dBu for 100 dB SPL setting; +10 dBu for 108 dB SPL setting; +4 dBu for 114 dB SPL setting
Common mode rejection ratio (CMRR)	>56 dB @ 15 kHz
Volume control	via Neumann.Control software
Volume control range; resolution	0 – dB; 0.1 dB
Input gain control (sensitivity)	0 dB … -15 dB
Output level control (output level in 1 m based on 0 dBu input level)	94; 100; 108; 114 dB SPL
Digital converter: resolution; design	24-bit DAC;
Digital converter: sampling rate	48 kHz
Digital internal sampling rate	48 kHz
Dynamic range A-D	114 dB(A)
Dynamic range A-D-A	111 dB(A) woofer; 112 dB(A) tweeter
Dynamic range D-A	114 dB(A) woofer; 117 dB(A) tweeter
Latency	2 ms (A-D-A linear phase)
Delay: User adjustable delay range	0 70 ms
Delay: Resolution: time; distance	0.1 ms; 3.44 cm (1 3/8)
Delay: Max. frames Audio-video synchronisation (lip sync)	1.75 (40 ms frames); 2.1 (33 ms frames)
Delay: Time-of-flight maximum distance	24 m (79 ft)
Controller design	Digital; active
Crossover frequency	1.8 kHz
Crossover slope	48 dB/oct; 8th order with phase correction
Equalization: Low-Mid	0; -1.5; -3; -4.5 dB
Equalization: via Neumann.Control software	8 x full parametric IIR + low / high shelf global balance
FIR phase correction	Linear phase (170 Hz … 16 kHz; +/- 45)
Protection circuitry	Independent soft clip, peak and thermo limiters for woofer and tweeter; Woofer excursion limiter; thermo limiter for the electronics and amplifiers
Infrasonic filter: frequency; slope	61 Hz; 12 dB/Okt.
Remote control	Neumann.Control software via an RJ45 connector carrying standard IP data
Display: On; Normal Operation	Neumann logo White
Display: Identification	Neumann logo Ros
Display: Limit / Clip / Errors / Protection /Boot Mute / Shut Down Mute	Neumann logo Red
Display Brightness	via Neumann.Control
Output power woofer amplifier (THD+N with limiter deactivated: 10%)	120 W
Output power tweeter amplifier (THD+N with limiter deactivated: 10%)	70 W
Output power woofer amplifier (THD+N with limiter deactivated: 0.1%)	90 W
Output power tweeter amplifier (THD+N with limiter deactivated: 0.1%)	50 W
Mains Power Supply: input voltage; frequency	100-240 V; 50/60 Hz
Power consumption (230 V / 100 V): Standby	<330 / <50 mW
Power consumption (230 V / 100 V): Idle	9 / 8 W
Power consumption (230 V / 100 V): Full output	180 W
In-rush current (Peak)	20 A
Standby	Disabled; 90 mins (default); user defined in software
Cabinet material	Composite polycarbonate
Cabinet surface finish; color (front / back)	Painted; metallic anthracite (RAL 7021) / Black (RAL 9005)
Operating conditions	+10 C to +40 C (+50 F to +104 F); <75% RH; non-condensing
Transport/storage conditions	-25 C to +60 C (-13 F to 158 F); <90% RH; non-condensing
Woofer	100 mm (4″) with protecting black metal grille
Tweeter	25 mm (1″) with protecting black metal grille
Mounting points	2 x M6 threaded inserts with 70 mm spacing on back panel; thread depth 15 mm (5/8)
Product dimensions (height x width x depth)	233 x 154 x 194 mm (9 1/8″ x 6″ x 7 5/8″)
External net volume	6.7 liters
Product weight	3.5 kg (7 lbs 8 oz)
Packed dimensions (height x width x depth), mm (inches)	345 x 277 x 243 mm (13 5/8″ x 10 7/8″ x 9 5/8″)
Packed weight	4.1 kg (9 lbs 1 oz)
Packed cube	0.023 m

DIAGRAMS

KH 80 DSP – Free-Field Response

KH 80 DSP – Low-Mid Acoustical Controls

KH 80 DSP – Phase Response

KH 80 DSP – Group Delay

KH 80 DSP – Maximum SPL at 1m (Blue: 3% THD, Green: 1% THD )

KH 80 DSP – Harmonic Distortion at 90 dB SPL (Blue: THD, Green: 2nd harmonic, Red: 3rd harmonic)

KH 80 DSP – Horizontal Directivity Plot

KH 80 DSP – Vertical Directivity Plot

KH 80 DSP – Cumulative Spectral Decay

Reviews

There are no reviews yet.

Be the first to review “Neumann KH 80 DSP 4″ Powered Studio Monitor(Each) – Gray”

At Our Store, we aim to deliver your orders as quickly and efficiently as possible. Below you will find everything you need to know about our shipping and delivery process.

Shipping Methods & Rates
We offer a variety of shipping options to meet your needs. The cost of shipping depends on the shipping method you choose, the destination, and the size of your order. Please refer to the shipping options available at checkout for more details.

Express Shipping: Delivery within 3-5 business days (next-day delivery for some locations).
International Shipping: Available to selected countries. Delivery time and shipping fees will vary based on destination.
Processing Time
Orders are typically processed within 1-2 business days from the time your order is placed. Please note that during peak seasons or promotional periods, processing time may be slightly longer.

Tracking Your Order
Once your order has been dispatched, you will receive an email with tracking information so you can monitor the status of your shipment. You can also check the status of your order in your account under “Order History.”

Delivery Times
Estimated delivery times vary depending on your location and the shipping method selected. For international orders, customs processing may cause delays, which are beyond our control.

Domestic Orders: Typically arrive within 3 business days.
International Orders: Delivery times may range from 7 business days, depending on the destination country and customs clearance times.

Lost or Damaged Packages
While we take great care to ensure your items are packaged securely, accidents can happen. If your order arrives damaged or you believe it’s lost, please contact us at customer service email or phone number within 7 days of receiving your package. We will investigate the issue and provide a solution.

Contact Us
If you have any questions or concerns about shipping and delivery, don’t hesitate to contact our customer support team at customer service email or phone number. We’re here to help!

Thank you for shopping! We appreciate your business and strive to provide you with an exceptional shopping experience.